Datalogic DS2100N Manual do Utilizador descarregar pdf (Página 29)

Setup Procedure Using Programming Barcodes

2.3.2 Static IP Addressing (DHCP Disabled)

1. For models connected to QL500 or CBX with BM2x0 modules: read the CBX

Ethernet TCP/IP enabled DHCP disabled barcode using the X-PRESS™ Autolearn

function (as described in chapter 1).

For Embedded Ethernet models: this is the default setting. To disable DHCP for these

models, restore the Factory Default settings as described in par. 1.3.

Before changing the Ethernet network settings on the PC running VisiSet™, close

any open applications which use network resources (i.e. Outlook, or Web browser).

3. On the Configuration PC, from the Control Panel>Network Connections, right-click on

the LAN connection icon and open the properties window.

4. Select the Internet Protocol (TCP/IP) item and open the properties window.

5. Set the IP Address fields as follows and click OK to save.

6. In VisiSet select the Ethernet Communication Channel in the Options>Communication

window. Then press the Look For Devices On Network button. The Matrix reader will

appear with its default IP Address in the list.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34

Sem comentários

Datalogic DS2100N Manual do Utilizador Página 29