Datalogic DS2100N Manual do Utilizador descarregar pdf (Página 25)

Setup Procedure Using Programming Barcodes

2 TCP/IP ETHERNET INTERFACE TO HOST

2.1 FOR MATRIX 400 OR MATRIX 200 FAMILY READERS

For Matrix 400 or Matrix 200 readers

having software 5.60 or later, connected to either a

QL500 or a BM2x0 module (inside a CBX connection box), you can setup the Ethernet

communication with programming barcodes.

Ì$CBETHD$-}Î

Ethernet TCP/IP enabled

DHCP enabled

Using the X-PRESS™ interface setup functions described in the Quick Reference Guide,

correctly position the reader and read one of these barcodes with the Learn function

The reader can now communicate using Ethernet TCP/IP.

For reader configuration through VisiSet™ using Ethernet TCP/IP, follow one of the

procedures in par. 2.3.

Ì$CBETHN$-\Î

Ethernet TCP/IP enabled

DHCP disabled

(uses static IP Address parameters) *

The Factory Default static IP address parameter settings for all QL500 or BM2x0 modules

are:

 IP Address = 172.24.24.1

 Subnet Mask = 255.255.0.0

 Gateway Address = 172.24.255.254

NOTE

For Matrix 400™ Ethernet models, Ethernet TCP/IP is enabled with the

above static IP address parameter settings by default. Therefore, it is not

necessary to read the DHCP disabled programming barcode for these

models.

Except Matrix 200™ UHD models.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 33 34

Sem comentários

Datalogic DS2100N Manual do Utilizador Página 25