Datalogic DS4800 Manual do Utilizador descarregar pdf (Página 21)

Setup Procedure Using Programming Barcodes

8 PARAMETER SETTING SUMMARY

The network setup through programming barcodes automatically sets

all the necessary

parameters in order to produce a consistent and correct configuration.

The following table summarizes the modified values and the related programming actions.

Programmed Code Modified Parameters

Stand Alone

Topology Role = Other

Reading System Layout/Local Device Alternative Network Setting = Alone or Id-Net

Master Synchronized

Topology Role = Master Synchronized

Operating Mode/ Operating Mode Selection = On Line *

Slave Synchronized

Topology Role = Slave Synchronized

Slave Address = xx

Operating Mode/ Operating Mode Selection = On Line *

Master Multidata Topology Role = Master Multidata

Slave Multidata

Topology Role = Slave Multidata

Slave Address = xx

Ethernet TCP/IP

DHCP Enabled

CBX Gateway>Host Interface Type = Ethernet TCP/IP

IP Addressing = DHCP

Ethernet TCP/IP

DHCP Disabled

CBX Gateway>Host Interface Type = Ethernet TCP/IP

IP Addressing = Static Assignment (uses static IP address parameters) **

* This setting only occurs if the starting Operating Mode is Continuous or Automatic

** The Factory Default static IP Address parameter settings are:

IP Address = 172.16.11.0

Subnet Mask = 255.255.0.0

Gateway Address = 172.16.0.2

25/11/11

1 2 ... 16 17 18 19 20 21

Sem comentários

Datalogic DS4800 Manual do Utilizador Página 21