Datalogic Controller SC6000 Manual de Instalação descarregar pdf (Página 63)

REDUNDANT SYSTEMS

6.7 DIAGNOSTIC ERROR MESSAGES

SC6000 error message syntax:

WS#xxx where WS means Working Standby and xxx is the error number as listed in the table:

WA#xxx where WA means Working Active and xxx is the error number as listed in the table:

PS#xxx where PS means Protecting Standby and xxx is the error number as listed in the table:

PA#xxx where PA means Protecting Active and xxx is the error number as listed in the table:

Diagnostic

Error Number

Meaning

[136]

Redundancy Role Exchange Warning: this warning is generated on the

Stand-by SC6000 to signal that the exchange of the Redundancy Role is in

progress.

[137]

Redundancy Serial Communication Failure: the communication through the

redundancy serial interface (PWO to PWO) has failed.

[138]

Redundancy Warning: the redundancy is not available. The Master Stand-

by SC6000 does not work OR an encoder or presence sensor error is

generated on the Master Stand-by SC6000.

[139]

Lonworks Communication Failure: the communication through the

Lonworks interface has failed.

[141]

Master Failure: the communication to the Master (Active or Stand-by) is not

available.

[143]

Power Failure: a power drop has occurred in the PWO power supply.

[145]

Presence Sensor Failure: a presence sensor warning has occurred only on

the Stand-by SC6000 of the redundant system and is transmitted by the

Active SC6000.

[147]

Encoder Failure: an encoder warning has occurred only on the Stand-by

SC6000 of the redundant system and is transmitted by the Active SC6000.

[163]

Max Consecutive Lost Parcels: The Standby controller recognizes n more

consecutive Parcels than the Active controller.

[165]

Max % Of Lost Parcels (Out Of 100 Parcels): The Standby controller

recognizes n out of 100 Parcels counted that the Active controller has not

counted.

SYNCHRONIZED Slave (Scanners) Error message syntax:

ss#xxx where ss is the slave scanner number and xxx is the error number as listed in the table:

Diagnostic

Error Number

Meaning

[16]

No Scan: scan signal missing

[81]

DIGITIZER: Motor Failure – no motor activity

[83]

DIGITIZER: Laser Failure – no laser activity

[97]

OSCILLATING MIRROR: Motor Failure – no oscillating mirror motor activity

[113]

FLASH: Motor Failure – no flash motor activity

[129]

No Sync: no flash sync signal

[130]

Encoder Failure Timeout: no encoder signal for more than the programmed

timeout.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 77 78

Comentários a estes Manuais

Sem comentários

Datalogic Controller SC6000 Manual de Instalação Página 63

Comentários a estes Manuais