Datalogic DS1100 Manual de Instalação descarregar pdf (Página 22)

DS1100

An anti-disturbance hardware filter is implemented on the External Trigger input

(about 1 millisecond delay).

An additional 15 ms (typical) delay can be implemented through a dedicated software

parameter (refer to WinHost Help On Line).

2.3.5 Outputs

Two general purpose outputs are available. These outputs can only be connected as

open collector configurations. The following pins are present on the 25-pin connector

of the scanner:

Pin Name Function

8 OUT1+ output 1 +

11 OUT2+ output 2 +

12, 22 GND I/O reference

The meaning of the two outputs OUT1 and OUT2 can be defined by the user (No

Read, Right or Wrong). Refer to the Winhost Help On Line.

By default, OUT1 is associated with the No Read event, which activates when the

code signaled by the external trigger is not decoded, and OUT2 is associated with

the Right event, which activates when the code is correctly decoded.

USER INTERFACE

Vext 50 Vdc max., 50 mA max.

DS1100

8/11

12/22

GND

Ground

Figure 11 - DS1100 Output connections

These outputs are both level or pulse configurable.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 35 36

Sem comentários

Datalogic DS1100 Manual de Instalação Página 22