Datalogic DX8200A-3002 Manual do Utilizador descarregar pdf (Página 9)

DX8200A-3002 QUICK GUIDE

WARNING

When installing several scanners, take care to position them correctly so that no laser beam

enters the reading window perpendicularly and at the same level of the output beam of the

other scanners. This condition could occur more frequently for side mounted applications. If

these precautions are not followed, it may occur that the laser of the blinded scanner starts

blinking due to an internal circuit which temporarily turns the laser off when detecting a power

anomaly. To resolve this problem, it is sufficient to slightly change the inclination and position

of one of the two scanners involved.

X-axis Reference Point Stops

The 2 washers and 2 spacers can be mounted to the Reading Station Frame using Bosch T-bolts and nuts to

create 2 stops which can be used to facilitate DX8200A mounting and positioning.

• During initial mounting, affix the stops in approximation to the mounting position. The weight of the DX8200A

can rest against this reference while the mounting bolts are being set. This avoids having to hold and maneuver

the scanner (especially for vertical side mounted positions) while simultaneously affixing it to the frame.

• Once the scanner is correctly positioned for PackTrack, fix the stops against the scanner. The stops remain

fixed to the station frame so that the scanner can be replaced without having to recalibrate the PackTrack

coordinates. Referring to the figure above, the stop provides a reference point for the X-axis while the scanner

should be centered on the frame to have a fixed reference for the Y-axis.

Scanner Direction

The different scanner orientations are illustrated in the following figures:

DX8200A-3002 Scanner Direction 0° (Forward) DX8200A-3002 Scanner Direction 180° (Reverse)

Top View

Conveyor Direction

Top View

Conveyor Direction

Create the stop b

using the washer,

spacer, t-bolt and nut.

1 2 3 4 5 6 7 8 9 10 11 12

Sem comentários

Datalogic DX8200A-3002 Manual do Utilizador Página 9