Datalogic DS2200 Manual de Instruções descarregar pdf (Página 10)

GUIDE TO INSTALLATION

The following can be used as a checklist to verify all the necessary steps for complete

installation of the DS2200 scanner.

1. Read all information in the section "Safety Precautions” at the beginning of this

manual.

2) Correctly mount the reader using the bracket provided according to the

information in par. 2.2.1.

3) Position the reader at the correct reading distance according to your model as

shown in par. 3.4.

4) Make electrical connections to your DS2200 scanner by either:

a) Connecting the test cable to the DS2200 scanner as described in par. 2.4.

b) Providing correct and complete system cabling according to the signals

necessary for the layout of your application.

• Layout: Point-to-point, RS485 Master/Slave, Multiplexer. See sub-

paragraphs under 2.6 for reference.

• Cabling: Power, Main Serial Interface - RS485 Half Duplex, Auxiliary

Interface - RS232, Inputs, Outputs, etc. For further details, see all sub-

paragraphs under 2.3.

5) Configure the DS2200 scanner by installing and running the WinHost

configuration program from the CD- ROM provided. The main steps are:

• Select the codes to be read

• Set-up the communication parameters

• Define data formatting parameters

• Fine tune your DS2200 scanner using the

Test Mode as described in WinHost.

Specific parameter details are available in the Help On Line. See also the

Guide

To Rapid Configuration link.

6) Exit the configuration program and run your application.

The installation is now complete.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 41 42

Sem comentários

Datalogic DS2200 Manual de Instruções Página 10