Datalogic C-BOX 300 Manual de Instalação descarregar pdf (Página 20)

DS4600A

2.3.1 Power Supply

Power can be supplied to the scanner through the pins provided on the 25-pin

connector used for communication with the host (Figure 6):

DS4600

GND

CHASSIS

Earth Ground

USER INTERFACE

CHASSIS

GND

V+ (10 - 30 Vdc)

Figure 6 - Power Supply Connections

or through the jack connector on the side of the 25-pin connector for connections to a

UL Listed Direct Plug-in Power Unit (Figure 7). If the jack input is used to supply

power to the DS4600A, pin 13 is automatically disconnected; the supply voltage for

the external trigger remains on pin 9. The plug connector is not supplied with the

DS4600A.

V+ (10 - 30 Vdc)

Jack

Plug

GND

Figure 7 - Power Supplied Using the Jack Connector

For Standard models, the power must be between 10 and 30 Vdc only. There is a

current peak of about 1A at 10 V during power on caused by the motor starting.

For Integrated Heater models, the power must be 24Vdc only.

It is recommended to connect pin 1 (CHASSIS) to a common earth ground.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 62 63

Sem comentários

Datalogic C-BOX 300 Manual de Instalação Página 20