Datalogic CBX500 Manual de Instalação descarregar pdf (Página 11)

CBX500 INSTALLATION MANUAL

9-PIN READING DEVICE AUXILIARY SERIAL INTERFACE

The reading device auxiliary serial interface available on the internal CBX500 9-pin connector can be used either

for configuration or for data monitoring.

Connections can be made to a PC or Laptop using a straight through cable or a USB-RS232 converter.

The details of the connector pins are indicated in the following table:

5 1

Figure 9 - 9-pin D-Sub Female Connector

9-pin Connector Pinout

Pin Name Function

2 TX Auxiliary RS232

3 RX Auxiliary RS232

5 SGND Auxiliary Reference Ground

1, 4, 6, 7, 8, 9 N.C.

NETWORK BUS TERMINATION

ID-NET™

OFF

Figure 10 – ID-NET™ Termination Resistance Switch

The ID-NET™ termination resistance switch enables or disables the insertion of the bus termination resistor for

ID-NET™ network applications.

CAUTION

In ID-NET™ network applications the termination resistor must be enabled ONLY on the first

and last devices of the chain. On all the other devices this resistor MUST NOT be enabled

(OFF).

1 2 ... 6 7 8 9 10 11 12 13 14 15

Sem comentários

Datalogic CBX500 Manual de Instalação Página 11